| 
For existing XT Series panels not originally configured with cellular communications, the 263G expansion card lets you add cellular capabilities. The 263G contains an on-board GSM/GPRS communications module that allows alarm messages to be communicated to an SCS-1R Receiver over the digital GSM/GPRS network. It provides a fully supervised alarm communication path over the GPRS network.
The 263G is installed in the panel enclosure and powered by the panel so no additional enclosure, power supply or battery back-up is needed. Plug-and-play installation makes upgrading your panel quick and easy, and provides all the features and benefits of an XT Series panel originally configured with cellular functionality.
The card is available as the 263G including a SIM card ready for activation with SecureCom Wireless, and the 263G NOSIM, ready for you to insert another provider’s SIM card.
|
|
XR500 Series Command Processor™ panel users can plug in the 463G expansion card to quickly and easily incorporate cellular communications.
Installed internal to the panel, it requires no additional enclosures, power supplies,
batteries, cabling or conduit connections ... simplicity available only from DMP. It can be equipped with local antenna that attaches magnetically to the panel, or where necessary for improved signal strength a remote SMA antenna can be used, offering more installation
flexibility.
The 463G draws half the current of other comparable units. With the long standby battery
life of the system batteries, the 463G can continue to provide a communications link for up to 80 hours during a power failure with appropriate standby batteries.
This digital cellular communicator is available as the 463G including a SIM card ready for activation with SecureCom Wireless, and the 463G NOSIM, ready for you to insert another provider's SIM card
|
|
For XR100/XR500 Series Command Processor™ panels, you can select from two versions of the CellCom Digital Cellular Communicator. Both versions provide a fully supervised alarm communication
path over the GSM/GPRS network.
The CellComRT Remote Communicator allows remote mounting of the cellular unit in the provided plastic housing, up to 250 feet from the panel. The CellComXR Communicator, the lowest cost XR100 option, is mounted inside the panel enclosure or 505 power supply enclosure.
The appropriate antenna is provided with each model.
Both the CellComRT and the CellComXR can be powered directly from the panel using the provided 4-wire harness. The CellComRT also can be powered from an optional 12V DC wall transformer. Both the CellComXR and CellComRT support all of the standard cellular diagnostics provided by the XR100/XR500.
|
